• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 52 subscribers
  • Views 135 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC2640R2F: Load code for manufacturing

Evan Wang
Genius 9590 points
Part Number: CC2640R2F
Other Parts Discussed in Thread: CC2640

Hi All,

The customer is interested in our CC2640R2F.
They would like to check how to load/write the code in CC2640.
From the D/S, It seems that we will have to go through J-TAG and use TMSC/TCKC/TDO/TDI for it, am I right?
Please kindly let us know how to download code into the main chip when manufacturing, we can understand the pins we need when we design the schematic.

https://e2e.ti.com/support/wireless-connectivity/bluetooth-group/bluetooth/f/bluetooth-forum/834433/cc2640r2f-does-cc2640r2-support-jlink-for-debug-and-program-download

if it's possible, please also share the UART-related information with us(Design/note...).

Thank you.

  • 0
    Guru 735685 points

    You can use cJtag to download program through debugger/programmer. In this case, you should connect VDD, GND, RESET, TMSC. and TCLK. TDI and TDO are not mandatory. By the way, wha kind of UART-related information are you asking?