CC2340R5: How to add CC2340R5 into code composer

ILSEOP HWANG

Prodigy 10 points

Part Number: CC2340R5
Other Parts Discussed in Thread: ENERGYTRACE,

Tool/software:

Hello.

I want to use cc2340R5 (launchPas XDS110 debugger with EnergyTrace)

Installation of code composer 12.8 is done.

Could you please let me know how I add cc2340R5 to my target

over 1 year ago

0 Ryan Brown1 over 1 year ago

TI__Guru**** 223077 points

Hello ILSEOP,

Please refer to the SimpleLink LowPower F3 SDK Quick Start Guide. In the section called CCS Download and Installation it is explained that you must select the Wireless Connectivity component during the CCS setup in order to install the correct dependencies. You can correct this by re-running the CCS installer.

Once this has been performed, you should be able to import an existing SDK example such as empty.

Regards,
Ryan

0 ILSEOP HWANG over 1 year ago in reply to Ryan Brown1

Prodigy 10 points

Hello.

I could install IDE, SDK and iar. thank you.
What I really want to do is testing "PHY-CODED" test.

My ev-board is LP-EM-CC2340R5.

I found this case while I'm looking for example

(+) CC2340R5: CC2340 cannot be configured to broadcast phy as coded - Bluetooth forum - Bluetooth®︎ - TI E2E support forums

Can I test PHY-CODED with my SDK and ev-board?

0 Ryan Brown1 over 1 year ago in reply to ILSEOP HWANG

TI__Guru**** 223077 points

I'm not sure what parameters are required for your coded test, however please note that you have more PHY options if evaluating with the Proprietary RF examples or when using Smart RF Studio 8.

Regards,
Ryan