• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 52 subscribers
  • Views 265 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

2650STK Motion Sensor Not Working

Tim Simerly
Genius 9995 points

Dear Support:


I recently sent a couple of brand new 2650STKs (received via estore.ti.com) to a customer and they were not able to get the motion sensor working. Please see the following previous posts:


e2e.ti.com/.../1484419

e2e.ti.com/.../437344

Do you know if there is a problem with the latest versions of 2650STKs getting the motion sensor to work and if so, what was the issue with these posts above?  Please advise.

Thanks,
Tim

  • 0
    TI__Mastermind 33460 points
    Hello Tim

    There was an issue in the sensor tag v1.2 firmware. This has since been fixed. You can remedy this issue by downloading our latest stack release (BLE v2.1) and flashing the sensor tag with the .hex file included in the Accessories folder of the BLE stack install.