• State
  • Locked Locked
  • Replies 3 replies
  • Subscribers 51 subscribers
  • Views 1145 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

cc2540 USB dongle work as BLEcentral

Vishal Mane
Prodigy 70 points
Other Parts Discussed in Thread: CC2540

Hello

I want measuer RSSI of Keyfob on usb dongle . When i flash BLEcentral code in usb dongle then it does not goes in device scanning mode.

and What are the changes required in BLEcentarl program  for USB dongle goes in scanning mode with press key or any other solution

  • 0
    Prodigy 70 points

     Hello

    I want cc2540 usb dongle use as BLEcentral. When I flash BLEcentral code in usb dongle but it not goes in device scanning mode.

    any other suggesition for i want measure  rssi value using USB dongle

  • 0
    Guru 735625 points
    You suppose to change hal_key.c and Push Button Configuration in hal_board_cfg.h to make it work on CC2540 USB dongle.
  • 0
    Guru 735625 points
    You suppose to change hal_key.c and Push Button Configuration in hal_board_cfg.h to make it work on CC2540 USB dongle.