CC2564C: Enter and exit sleep mode APIs

Everardo Garcia

Part Number: CC2564C

I am trying to implement a sequence using the Bluetopia SDK to enter and exit the sleep mode of the BT device

Can someone point out the proper APIs and sequence that they should be called.

I have found references to VS_Update_HCILL_Parameters() and VS_Enable_Sleep_Mode() but I do not find any documentation on how they should be implemented

thanks

over 7 years ago

0 S over 7 years ago

TI__Mastermind 35795 points

Hi ,
Your query has been assigned to relevant engineer. We will get back to you shortly.

Thanks
Saurabh

0 dale over 7 years ago

TI__Expert 6335 points

Everado,

Please refer to this previous E2E post regarding implementation of Sleep Mode.

0 Everardo Garcia over 7 years ago in reply to dale

Prodigy 90 points

Thanks, that help, however while digging in to the Bluetopia SDK I found out that its already making the configurations in one of the examples in HCI_VS_InitializeAfterHCIReset() and it makes tha call to the suspend mode when the callback Sleep_Indication_Callback() on the demo is executed also this page explains how it gets in to sleep mode and wakeup processors.wiki.ti.com/.../CC256x_eHCILL_Low_Power_Protocol

Bluetooth®︎

Bluetooth forum

CC2564C: Enter and exit sleep mode APIs