• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 51 subscribers
  • Views 502 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

Host test firmware

Host test firmware

Vishal Nandanwar
Intellectual 550 points
Other Parts Discussed in Thread: CC2650MODA

Hello,

I am using Host test firmware on CC2650MODA module

I am resetting the BLE module using a HCI command. But found that some times module does not respond with the reset event, that means it is not getting reset.

Is this known? or am I doing something wrong?

Vishal N

  • 0
    TI__Guru* 79471 points
    Hi Vishal,

    Do you get a command complete HCI event at all, or just not one with the expected response? Does the return status parameter from the HCI_Reset call contain any error code, or is the return status 0x00?

    Regards,
    Katie
  • 0 in reply to Katie Pier
    TI__Guru* 79471 points
    Hi Vishal,

    It's been a while since you posted so I'm hoping you were able to resolve the issue. I'm closing this thread due to inactivity but please post back if you are still encountering the issue and we can continue to help.

    Regards,
    Katie