CCS/CC2650STK: CC2650STK

Douglas Silva

Part Number: CC2650STK
Other Parts Discussed in Thread: BLE-STACK

Tool/software: Code Composer Studio

Hello!

I need to use module CC2650STK packed i can turn on the module with the app? Or other solution, like to keep the module switched on?

Thaks!

over 8 years ago

0 Sean2 over 8 years ago

TI__Mastermind 33460 points

Hello,

I am not sure I understand what you mean, do you mean that you wish to re-create a sesnortag using a module board file?

0 Douglas Silva over 8 years ago in reply to Sean2

Prodigy 30 points

Hello,

No, I will put the sensor tag in the box and encapsulated because i use the sensor inside the water, for this i need to turn on the sensor with the app or keep it always on.

0 Douglas Silva over 8 years ago in reply to Douglas Silva

Prodigy 30 points

Hello,

I need to keep the module CC2650STK always on, its possible to do?

Thaks!

0 Sean2 over 8 years ago in reply to Douglas Silva

TI__Mastermind 33460 points

Hello,

yes, it is possible to keep always on.
If you are using a BLE-Stack project, just remove the define: POWER_SAVING from the preprocessor defines. Then the device will not sleep.

Bluetooth®︎

Bluetooth forum

CCS/CC2650STK: CC2650STK