RTOS/CC2650MODA: CC2650MOD Host mcu

Kz777

Expert 7895 points

Part Number: CC2650MODA
Other Parts Discussed in Thread: CC2650

Tool/software: TI-RTOS

Hi Champs,

I use MSP430 base Host MCU for cc2650mod.

Do you have any restriction of Host MCU in case of Non

use MSP432 ？

over 7 years ago

0 Evan W over 7 years ago

TI__Mastermind 40450 points

Hi KZ,

Can you clarify? If you want to use the MSP432, please use the Bluetooth Plugin: www.ti.com/.../SIMPLELINK-SDK-BLUETOOTH-PLUGIN

0 Kz777 over 7 years ago in reply to Evan W

TI__Expert 7895 points

No, I want to use MSP430

0 Evan W over 7 years ago in reply to Kz777

TI__Mastermind 40450 points

Hi,

Please look at this thread and the threads it points to.

Why do you need the MSP430 in this case?
e2e.ti.com/.../701619

The CC2650 can do quite alot as an MCU as well as BLE.

0 Kz777 over 7 years ago in reply to Evan W

TI__Expert 7895 points

Because, we need segment LCD control and back light.
we need Host MCU. I understand this is possible. BTW, do you have any guideline for external MCU (Not MSP432) guide line ?

0 Evan W over 7 years ago in reply to Kz777

TI__Mastermind 40450 points

I would not attempt to make the MSP430 the host MCU and run the CC2650 in NWP.

What I would do then is use the MSP430 for whatever you need and communicate via SPI/UART/I2C to the CC2650 and run the CC2650 as a simple_peripheral or whatever GAP Role you need.

We do not have guidelines for using the CC2650 as a network processor using an MSP430 and would require development that we will not commit to on our side.

Bluetooth®︎

Bluetooth forum

RTOS/CC2650MODA: CC2650MOD Host mcu