CCS/CC2650STK: CC2650 BLE

Dong Nguyen Thanh

Part Number: CC2650STK
Other Parts Discussed in Thread: BLE-STACK

Tool/software: Code Composer Studio

HELLO.

I used the project Sensortag_cc2650stk_app, stack and bim_flash.

but MCU only works when debugging on CCS.
My diagram lacks external memory Does it have any effect and how to fix it?

Thanks !

0 Marie H over 5 years ago

Hi Dong,

Is your application OAD enabled? In that case you need to program it with an image with a valid crc for it to work without the debugger attached.

(Does it work if you start the application with the debugger attached, do an oad, disconnect the debugger and reset the device?)

What version of the BLE-Stack are you using?

What kind of board are you running on? LaunchPad? SensorTag? Custom board?

0 Dong Nguyen Thanh over 5 years ago in reply to Marie H

I have a LauchPad. PCB layout to according Sensortag . And I test on Lauchpad everything is normal.

I used BLE_stack 2.2.2 .

All other operations without debugging are ineffective.

Thanks.

0 Dong Nguyen Thanh over 5 years ago in reply to Dong Nguyen Thanh

you a check schematic to me.Please
I want to know the difference between my schematic and lauchPad. thanks 4213.SMART LOCK.pdf

0 Elin W over 5 years ago in reply to Dong Nguyen Thanh

Hi Dong,

It looks like you have received a lot of help with this issue here and it seems like the issue has been resolved.

Thanks,
Elin

Bluetooth forum