CC1310: How to reset CC1310 via firmware at present?

JEnginnerHW

Part Number: CC1310

Tool/software:

but the headers do not match when implementing.
Could you please help me with the most up to date information on this issue.

Thanks in advance.

+1 Marie H over 1 year ago

Hi,

SysCtrlSystemReset() is the recommended API for inducing a reset.

What do you mean by "the headers don't match"?

Cheers,

Marie H

0 JEnginnerHW over 1 year ago in reply to Marie H

Hi Marie.
I'm referring to the heading I should include for the declaration of SysCtrlSystemReset()

0 JEnginnerHW over 1 year ago in reply to JEnginnerHW

I have made the following inclusion and I get an error. What is the way to include these driverlib APIs in my CC1310 project?

+1 Marie H over 1 year ago in reply to JEnginnerHW

Hi,

You have to give the full path: C:\ti\simplelink_cc13x0_sdk_4_20_02_07\source\ti\devices\cc13x0\driverlib

We have made a macro that points to C:\ti\simplelink_cc13x0_sdk_4_20_02_07\source\ti\devices that you can use:

#include DeviceFamily_constructPath(driverlib/sys_ctrl.h)

Cheers,

Marie H

0 JEnginnerHW over 1 year ago in reply to Marie H

Hello Marie.

Please could you be more specific (an example please).
Where do I give the complete route?

Thanks in advance

0 JEnginnerHW over 1 year ago in reply to Marie H

Hello Marie.
During my workday today, I have set the definition like this and now SysCtrlSystemReset() works very well.

Thanks for your help.

Sub-1 GHz forum