This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC1310: The shift in temperature is large enough to make synth out of lock

Part Number: CC1310

Tool/software:

Hi, 

I previously asked the question about CC1310 TX failed when the shift in temperature is too large (> 25 °C). According to TI's suggestion, I should recalibrate via CMD_FS command before doing TX. In our scenario, CC1310 will transmit data every second. In order to fix this issue, I plan to put an additional CMD_FS in front of CMD_TX.  Will my solution cause any side effect? 

Thanks.