LAUNCHXL-CC1310: CC1310F128RMS

arvind goswami

Part Number: LAUNCHXL-CC1310
Other Parts Discussed in Thread: CC1310

Tool/software:

Hi,

I have a LAUNCHXL-CC1310 board. I have successfully developed my EchoTx and EchoRx using the provided example. However, I want to use the same code on the CC1310F128RMS microcontroller. How can I achieve this? Please guide me.

7 months ago

0 Theo Lange 7 months ago

TI__Expert 7645 points

Hi Arvind,

Could you please explain me in more detail what you want to achieve?

What kind of custom hardware are you using with the CC1310 and do you have a connection that can be used for programming/debugging?

Did you already try to flash your code for the CC1310?

Kind regards,
Theo

0 arvind goswami 7 months ago in reply to Theo Lange

Prodigy 20 points

For the development we worked on the evaluation board and our firmware is finalized with the this for the RF frame transmit and receive. now we develop our own hardware with the small package CC1310F128RSMT. we successfully load the firmware but its not sending any frame on RF. So any way to use same code in CC1310F128RSMT controller. Blow is my Hardware Ckt for CC1310F128RSMT.

0 Theo Lange 7 months ago in reply to arvind goswami

TI__Expert 7645 points

Hi Arvind,

yes, you can run the code no matter of the package that you chose.

You need to adjust the projects board files to your custom hardware. Please see the guide here: https://dev.ti.com/tirex/explore/content/simplelink_cc13x0_sdk_4_20_02_07/docs/proprietary-rf/proprietary-rf-users-guide/proprietary-rf-guide/custom-hardware.html#

Can you run the debugger with your custom hardware to see if it is executing the radio commands?

Kind regards,
Theo

Sub-1 GHz

Sub-1 GHz forum

LAUNCHXL-CC1310: CC1310F128RMS