CC1310: CC1310 with Contiki OS

Muthu Kumar95

Prodigy 60 points

Part Number: CC1310

Hi,

I'm new to contiki os, I'm using CC1310 chipset, In this how to change the Tx power?

over 7 years ago

0 YiKai Chen over 7 years ago

Guru 735685 points

You can use API set_tx_power to change TX power.

0 Muthu Kumar95 over 7 years ago in reply to YiKai Chen

Prodigy 60 points

Thanks for your reply. I'm working in mqtt-demo located in "contiki\examples\cc2538-common". The Example working fine, when i try to form a mesh network, the node's are not connect. Suggest me to form a mesh network with mqtt protocol, i'm running mosquitto mqtt broker in my PC.
My aim is to form a mesh network using cc1310 and send a periodic data to mqtt Broker.

0 YiKai Chen over 7 years ago in reply to Muthu Kumar95

Guru 735685 points

Try to refer to sunmaysky.blogspot.com/.../how-to-setup-mosquitto-on-raspberry-pi.html

Sub-1 GHz

Sub-1 GHz forum

CC1310: CC1310 with Contiki OS