infinite loop _SlDrvWaitForPoolObj when Sl_Stop - Porting CC3100 to STM32F4

Dupont Dupont

Other Parts Discussed in Thread: CC3100

Hi,

in my CC3100 porting, i done successfully the sl_Start and sl_WlanSetMode. So after sl_WlanSetMode, i must restart the cc3100, i try to execute a sl_Stop but nothing is send and go in infinite loop on _SlDrvWaitForPoolObj. What is it waiting for sending TX Stop code?

Thanks

over 10 years ago

0 Dupont Dupont over 10 years ago

Intellectual 550 points

solve

0 Joseph Gigi over 10 years ago in reply to Dupont Dupont

TI__Guru* 85400 points

Hi,

Thanks for the update - It would be better if you could brief about your solution so it could benefit the others as well.

Regards,
Gigi Joseph.

0 Dupont Dupont over 10 years ago in reply to Joseph Gigi

Intellectual 550 points

Actually I solve it by a different way . I mean, i used sl_Stop (0xFF), stop cc3100 after all active operation, but when i use it, the function loop infinitly waiting for all operation finish. So i change for 500 ms timer and sl_Stop(0) which stop directly the device. And now it works.

Wi-Fi

Wi-Fi forum

infinite loop _SlDrvWaitForPoolObj when Sl_Stop - Porting CC3100 to STM32F4