CC2652P7: SmartRF Studio PERL Extension does not work

Shuyang Zhong

Part Number: CC2652P7

A customer is trying to run the PERL extension of SmartRF Studio, but met the problem below:

"Cant find boot_dal_ext symbol in ./dal_ext.dll at dal_ext.pm line 11"

There is similar issue reported:

https://e2e.ti.com/support/wireless-connectivity/sub-1-ghz-group/sub-1-ghz/f/sub-1-ghz-forum/1041384/perl-scripting-support-with-smartrf-studio?keyMatch=DAL%20EXT%20DLL

Is this a known issue?

Best regards,

Shuyang

over 3 years ago

0 Ryan Brown1 over 3 years ago

TI__Guru**** 222817 points

Hello Shuyang,

As mentioned in the other E2E threads, the SmartRF Studio PERL scripts are not maintained or supported on Windows 10. The customer should reference a different solution for their needs.

Regards,
Ryan

0 liuhuasheng over 3 years ago in reply to Ryan Brown1

Prodigy 20 points

Hi Ryan，

It it also can not run on Windows7，as follows.How can I use the SmartRF Studio PERL scripts which automatic generation by smartrftm_studio-2.28.0.zip.

win7

Regards,

huasheng Liu

0 Ryan Brown1 over 3 years ago in reply to liuhuasheng

TI__Guru**** 222817 points

Hi huasheng,

There appear to be some prerequisites and installation instructions: https://software-dl.ti.com/lprf/smartrftm_studio/docs/help/html/perl.html
Please refer to this similar E2E thread: https://e2e.ti.com/f/1/t/702630

Regards,
Ryan

0 liuhuasheng over 3 years ago in reply to Ryan Brown1

Prodigy 20 points

Hi Ryan,

I have tried all these methods on E2E , and they are the same phenomenon.We can't run the scripts.

Can you help me to try to run the scripts on your computer?

0 Ryan Brown1 over 3 years ago in reply to liuhuasheng

TI__Guru**** 222817 points

I will ask the Tools Team to comment and provide a response within 24 hours.

Regards,
Ryan

0 Ryan Brown1 over 3 years ago in reply to liuhuasheng

TI__Guru**** 222817 points

Tool Team's response:

Unfortunately the Perl scripting only support the 8051 MCUs and the legacy Transceivers. See description of the Test Environment that can be found on the Tools menu in the Startup Window. For the ARM based wireless MCUs the only test environment that is provided is the Radio Test Library (RTLib).

Regards,
Ryan

Zigbee & Thread

Zigbee & Thread forum

CC2652P7: SmartRF Studio PERL Extension does not work