CC2530: i dont recieve ZDO_END_DEVICE_ANNCE_IND

navidrct ansari

Expert 1975 points

Part Number: CC2530
Other Parts Discussed in Thread: CC2531, Z-STACK

i recieved ZDO_TC_DEV_IND but never i recieved ZDO_END_DEVICE_ANNCE_IND .

should i use ZDP_MgmtPermitJoinReq ?

someone give me an example to how to use it please

please see this post too

over 8 years ago

0 YiKai Chen over 8 years ago

Guru 735695 points

Can you provide sniffer log?

0 navidrct ansari over 8 years ago in reply to YiKai Chen

Expert 1975 points

i dont have any sniffer
i did all thing that u said in ur blog and make a coordinator with znp
do u have any example router for cc2530 inner 8051 to be able to connect to our zigbe coordinator znp and send data?

0 YiKai Chen over 8 years ago in reply to navidrct ansari

Guru 735695 points

You can use SampleLight in Z-Stack 3.0.1 to join and work with ZNP without problem. By the way, Packet sniffer is an important tool and I suggest you to buy CC2531 USB dongle/CC Debugger to do it.

0 navidrct ansari over 8 years ago in reply to YiKai Chen

Expert 1975 points

i have a custom board that does not have any lcd or led

0 YiKai Chen over 8 years ago in reply to navidrct ansari

Guru 735695 points

LCD or LED is not mandatory but I would suggest you to connect at least one LED to your CC2530.

0 navidrct ansari over 8 years ago in reply to YiKai Chen

Expert 1975 points

the problem was because i was using printf to debug the project and it casuse of error
simply comment printf out and it worked

0 YiKai Chen over 8 years ago in reply to navidrct ansari

Guru 735695 points

Cheers!

Zigbee & Thread

Zigbee & Thread forum

CC2530: i dont recieve ZDO_END_DEVICE_ANNCE_IND