Zigbee & Thread

Zigbee & Thread forum

State
Locked Locked
Replies 19 replies
Subscribers 55 subscribers
Views 6335 views
Users 0 members are here

Support feedback

Options

Options

Related

cc2530: Error in HEX file verification

saket thool

Prodigy 150 points

Part Number: CC2530
Other Parts Discussed in Thread: Z-STACK

while programming cc2530 with cc debugger when i select option to erase, program and verify i get error as "Error in HEX file verification" as shown in figure 1. but when i try to program it with 2nd option erase and program only it say erase and program ok but nothing happens. please help me.

over 7 years ago

0 YiKai Chen over 7 years ago

Guru 735685 points

How do you get this bootloader.hex?

0 saket thool over 7 years ago in reply to YiKai Chen

Prodigy 150 points

i am using this www.waveshare.com/.../Core2530_(B) site as reference and resources.

0 YiKai Chen over 7 years ago in reply to saket thool

Guru 735685 points

I don't see where to download bootloader.hex or related project.

0 saket thool over 7 years ago in reply to YiKai Chen

Prodigy 150 points

in https://www.waveshare.com/wiki/File:Core2530-B-Serial-Firmware.7z this zip there is folder named firmware under which bootloader.hex file is there which is compiled for cc2530 but not working for me

0 YiKai Chen over 7 years ago in reply to saket thool

Guru 735685 points

I only see coordinator.bin, router.bin, and enddevice.bin. There is no bootloader.hex file in the 7z file.

0 saket thool over 7 years ago in reply to YiKai Chen

Prodigy 150 points

yes.www.waveshare.com/.../File:Core2530-B-Bootloader.7z this contains bootloader.

0 YiKai Chen over 7 years ago in reply to saket thool

Guru 735685 points

I have no problem to erase, download, and verify those two bootloader hex files. Which flash programmer version do you use?

0 saket thool over 7 years ago in reply to YiKai Chen

Prodigy 150 points

d

0 saket thool over 7 years ago in reply to YiKai Chen

Prodigy 150 points

this version i am using

0 YiKai Chen over 7 years ago in reply to saket thool

Guru 735685 points

I use the same version too.

0 saket thool over 7 years ago in reply to YiKai Chen

Prodigy 150 points

what more things should i debug ?

0 YiKai Chen over 7 years ago in reply to saket thool

Guru 735685 points

If you download prebuilt ZNP hex file from Z-Stack, does it work?

0 saket thool over 7 years ago in reply to YiKai Chen

Prodigy 150 points

no . they are also not working for me. :(

0 YiKai Chen over 7 years ago in reply to saket thool

Guru 735685 points

It sounds like HW issue. I suggest you to contact whom sales you the module for help.

0 saket thool over 7 years ago in reply to YiKai Chen

Prodigy 150 points

i have designed HW circuit for my self as attached with this. please help me to find and issue in this schematic.untitled.pdf

0 YiKai Chen over 7 years ago in reply to saket thool

Guru 735685 points

So, do you buy module from www.waveshare.com/.../Core2530_(B) or do you design the module by yourself?

0 saket thool over 7 years ago in reply to YiKai Chen

Prodigy 150 points

i have designed the module by myself for academic project

0 saket thool over 7 years ago in reply to saket thool

Prodigy 150 points

can you provide me rough sketch of most essential components and pins to be connected while programming cc2530

0 YiKai Chen over 7 years ago in reply to saket thool

Guru 735685 points

You can refer to