Linux/CC2530: ZED unable to join the network

Harinaryanan Gajapathy

Part Number: CC2530

Tool/software: Linux

Hi YK Chen,

I see ZED or ZR are unable to join the network after one device added to the network. Attached the log file for your reference.

/cfs-file/__key/communityserver-discussions-components-files/158/1778.log.zip

over 6 years ago

0 YiKai Chen over 6 years ago

Guru 735625 points

Do you erase flash of your ZED/ZR before you test this?

0 Ryan Brown1 over 6 years ago

TI__Guru**** 211917 points

Hari,

Your sniffer log only shows the same ZR/ZED (as identified by the IEEE address) constantly re-associating with the ZC without any further Zigbee network communication. It is also missing several packets, as we see several MAC ACKs but not the Data Request packets they are acknowledging. I suggest that you better-position your sniffer device and place your nodes closer to the gateway for testing purposes.

Regards,
Ryan