CCS / CC2652R：ZigBee networking, how to maintain the maximum transmission rate without affecting reception in networking mode

user6018199

Part Number: CC2652R

Tool/software: Code Composer Studio

Hello, I am now using ZigBee networking. I need each node to test to maintain the maximum broadcast rate in networking mode without affecting data reception. I didn't find any similar functionality in your sample code.

I would like to ask if there is a similar demo code in the forum. Thank you！

The Development Board Web Site I'm currently using：http://www.ti.com/tool/LAUNCHXL-CC26X2R1。

over 6 years ago

0 YiKai Chen over 6 years ago

Guru 735685 points

As I know, there is no such or similar demo code. By the way, it's not recommended to use broadcast continuously in Zigbee mesh network since it might causes broadcast storm.

0 user6018199 over 6 years ago in reply to YiKai Chen

Prodigy 60 points

Hello, thank you for your reply.

If I send it in binding mode, can I use Binding to send it in succession?

0 YiKai Chen over 6 years ago in reply to user6018199

Guru 735685 points

Yes, you can use binding mode.

Zigbee & Thread

Zigbee & Thread forum

CCS / CC2652R：ZigBee networking, how to maintain the maximum transmission rate without affecting reception in networking mode