• State Resolved
  • Locked Locked
  • Replies 4 replies
  • Subscribers 14 subscribers
  • Views 805 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320C25: Looking for a development environment for this old device !!

JULIEN ROUX
Prodigy 60 points
Part Number: TMS320C25

Hello,

I am looking for a development environment for the old TMS320C25 DSP as I need to do some maintainance on an old application running on this DSP.

From what I can understand, none of the CCS versions available for download support this target....

Thanks for the help

Regards,

Julien

  • 0
    TI__Guru 62930 points
    Julien,
    As you are likely aware, this product has been on NRND (Not Recommended for New Design) for quite some time.
    Unfortunately, we do not have development environment available for this processor any longer.
    There may be a chance I could locate software. I believe that this was DOS (and VMS/UNIX based).
    In prior searches, I have not been able to locate any hardware/emulator setups to interface with device. However, I just searched, and there is one that shows up on ebay.

    I can pursue the possibility of locating software. However, if I can obtain it will be completely unsupported and potentially with missing documentation. Possibly with cost?
    Very likely this will require a PC with older version of DOS (circa 1990)

    Please let me know if you would like me to pursue options on obtaining the MS/PC DOS version.

    Regards,
    Wade
  • 0 in reply to Wade Vonbergen
    Prodigy 60 points

    Hello Wade,

    Thanks for your support.

    Yes, I remain interested even is the solution requires and old DOS.

    We were using Code Generation Toolset V6.60 in the past, it was a DOS tool.

    Thanks for your help !

    Julien

  • 0 in reply to JULIEN ROUX
    TI__Guru 62930 points
    Julien,
    I will send followup via email to handle outside of forum.

    If this answers your question, please click "Verify it as the answer"
    Regards,
    Wade
  • 0 in reply to Wade Vonbergen
    Prodigy 60 points

    Wade,

    Ok, thanks !

    Regards,

    Julien