ADC32J44: How to configure K as 16

Jerry Chen

Expert 5110 points

Part Number: ADC32J44

Hi,

My customer would like to configure K = 16. How to configure the value of Register 31h?

Thanks.

over 7 years ago

0 Ken C over 7 years ago

TI__Genius 12965 points

Jerry,

Sorry for the late response. Somehow this post was missed from 1 week ago.

You can change the K values by enabling control K bit in register x2Bh, then setting the K value in register x31h

Ken.

0 Ken C over 7 years ago in reply to Ken C

TI__Genius 12965 points

For further clarification the value of the K register is set as K-1, so in this case you can enable Ctrl-K, then set K register value = 15 for K=16.

Ken

Data converters

Data converters forum

ADC32J44: How to configure K as 16