• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 46 subscribers
  • Views 988 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[tvp7002] Is it possible to remove almost SAV and EAV?

Hayden Kim
Genius 15580 points
Other Parts Discussed in Thread: TVP7002

With TVP7002, customer converts input video signal from YPbPr (component) to digital video.

For about the video signal, is it possible to remove all (almost) SAV and EAV, and get only Active Pixel and convert it?

If possible, can you guide what registers should be used?

 

 

Thanks and regards,

Hayden

  • 0
    TI__Mastermind 43875 points

    Hayden,

    What do you mean by "remove the SAV and EAV"??? There are 1280 active pixels and these are all that is captured.

    This is not like ITU656 where there are embedded digital codes in the output datastream.

    The diagram is merely showing where video start and ends.

    BR,

    Steve