CCS/TMS320F2812: Uniflash faster multicore programming

Leonid Kurilan

Intellectual 365 points

Part Number: TMS320F2812
Other Parts Discussed in Thread: UNIFLASH

Tool/software: Code Composer Studio

I have two devices TMS320F2812 in JTAG chain.

How can I define it in Uniflash 4.2.1?

Should I use another software?

over 5 years ago

0 Ki over 5 years ago

TI__Guru**** 421520 points

Hello,
UniFlash does not support a configuration with multiple devices on the same JTAG chain. It is recommended to use CCS to program them.

Thanks
ki

0 Leonid Kurilan over 5 years ago in reply to Ki

Intellectual 365 points

Hi, ki

Please explain where should I define JTAG chain (2 devices TMS320F2812) in CCS project.

Is this ok?

How can I check the chain existence?

Thanks.

0 Ki over 5 years ago in reply to Leonid Kurilan

TI__Guru**** 421520 points

You need to create a custom target configuration and specify two 2812 devices.

If you were using an XDS100v2, It would looksomething like:

Code Composer Studio™︎

Code Composer Studio forum

CCS/TMS320F2812: Uniflash faster multicore programming