• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 41 subscribers
  • Views 1536 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TINA/Spice/OPA4171-Q1: Convert TINA-Spice Model to Orcad PSpice Model

Peter Van Calligan
Prodigy 20 points
Part Number: OPA4171-Q1
Other Parts Discussed in Thread: TINA-TI

Tool/software: TINA-TI or Spice Models

Is their a way to convert and import a TINA-Spice model to the Orcad P-Spice.

When I attempt to create the .olb files with the model editor, I get the following error:

"Translator used for creaating Design Entry HDL parts not found!  Please cconfigure TransOLB path in the PSpice.ini file"  I don't have this issue when importing non-TINA based models.  Is their a way to get this model which isn't dependent upon HDL parts?  Or am just out of luck for this.

I don't have TINA-Spice as our company has very restrictive software policies.

  • 0
    TI__Intellectual 1440 points

    Hi Peter,

    I tried creating .olb files and it worked well for me. Please find message below:

    It looks like there is some issue with Pspice.ini file. Please verify it once. Also please find my settings(by default) in "Pspice.ini" file for "Model Editior" if it helps.

    Please let me know if you need further help.

    Alternatively you can use TINA-TI which is a free spice simulator.

  • 0
    TI__Mastermind 30305 points

    Hi Peter,

    When Model Editor starts, it askes you to select a design entry tool. Did you select "Capture"?

    Thanks,
    JC