LightCrafter 4500 EVM

Anand Singh50

Hello,

I would like to know about the focusing unit of LightCrafter 4500 EVM. Can someone tell me about the lens specifications (their focal length) or the distance between DLP mirror and the first lens for projection? It would be a great help.

Thanks,

Anand Singh

over 6 years ago

0 Kyle Rakos over 6 years ago

TI__Mastermind 20045 points

Hello Anand and welcome to the forums,

This post may be able to help you (see the first answer by Sanjeev). The focal length is 14mm. Hope that helps.

Thanks,

Kyle

0 Anand Singh50 over 6 years ago in reply to Kyle Rakos

Prodigy 115 points

Thanks, it is going to be quite helpful. I am trying to put this device on a microscope.

Kind regards,

Anand

0 Jack Liu64 over 6 years ago

Prodigy 35 points

Hello Anand,
I'm recently considering attaching my light engine PRO4500 using DLP350 chip as well onto the microscope in lab. But I have encountered some problems such as the projector hanging system, or the re-focusing process through the mirror. May I ask for your advice for this? Thank you!

DLP®︎ products

DLP products forum

LightCrafter 4500 EVM