• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 27 subscribers
  • Views 467 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DLPDLCR3010EVM-G2: LabView or Matlab control

Tim Z
Prodigy 10 points
Part Number: DLPDLCR3010EVM-G2

Hi All,

I wonder if DLPDLCR3010EVM-G2 can be controlled by LabView or Matlab? I appreciate any information and helps! 

Tim

  • 0
    TI__Mastermind 28005 points
    Tim,

    Thanks for your interest in our DLP products, and welcome to the E2E forums.

    Our EVMs are controlled via a Cypress USB-I2C chip on the EVM itself, with Windows drivers utilized by our GUI software to talk to the EVM. In order to use this EVM with LabView or Matlab, you would need to write software that talks through the Cypress driver to send appropriate I2C commands to the system. Unfortunately, we don't provide such software at this time so you would need to implement it on your own.

    I hope this helps. Let me know if you have further questions.

    Best Regards,
    Philippe Dollo