TUSB9261 removable storage device

Byung Son

Other Parts Discussed in Thread: TUSB9261

We use TUSB9261 to connect Sata memory module.
When SATA is attached,it is connected as a fixed mass storage device.
Could it possible to change it as a removable mass storage device.
Thank you,

Byung

over 9 years ago

0 Elias Villegas M. over 9 years ago

TI__Guru* 76130 points

Hello,
Unfortunately no, the default firmware can't be changed.
Why do you need it to present as removable?
Regards

0 Byung Son over 9 years ago in reply to Elias Villegas M.

Prodigy 30 points

Our customer ask us SATA memory module appear as removable driver same as USB memory stick.
We are looking for alternative possible solution.

0 Elias Villegas M. over 9 years ago in reply to Byung Son

TI__Guru* 76130 points

Can you provide more details about this opportunity?
I will forward the information to the FW engineer.
Regards

0 Byung Son over 9 years ago in reply to Elias Villegas M.

Prodigy 30 points

We just delivered several test units to our customers.
We will ship more than 10K units for several years.
Currently we are using TUSB926x_FW_v1.03_SATA_NO_POLARITY_SWAP.hex firmware.
Thanks,

0 Elias Villegas M. over 9 years ago in reply to Byung Son

TI__Guru* 76130 points

I will send you an email with more information.
regards

Interface

Interface forum

TUSB9261 removable storage device