• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 15 subscribers
  • Views 495 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ISO7721: NC pins connected to GND

Wayne Wang20
Expert 4360 points
Part Number: ISO7721

Hi team,

Just a quick question. I just want to check that in the ISO7721 DW package, if the "NC" pins can be connected to GND? Thanks.

Best regards,

Wayne

  

  • 0
    TI__Guru 52980 points
    Hi Wayne,

    The NC pins are not connected to anything internally hence it is best if they are left unconnected. But if your application requires this pin to be connected to GND then that shouldn't be an issue to the device. Thanks.


    Regards,
    Koteshwar Rao