Mr/Mrs,
I use 28335 with FIFO mode of 3 SCI A, B, C controller.
In the serial SCIC, the SCIFIFOFE bit was set. But I can not clear it.
I tried to SW_RESET, but the bit was not cleared.
Any method is it?
CheolHyeon Cho,
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Mr/Mrs,
I use 28335 with FIFO mode of 3 SCI A, B, C controller.
In the serial SCIC, the SCIFIFOFE bit was set. But I can not clear it.
I tried to SW_RESET, but the bit was not cleared.
Any method is it?
CheolHyeon Cho,