• State Answer Suggested
  • Locked Locked
  • Replies 4 replies
  • Answers 1 answer
  • Subscribers 81 subscribers
  • Views 1164 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Problem with ultra librarian export to mentor

Ras Sharif50
Genius 3455 points
Other Parts Discussed in Thread: TMS320F28335

Dear All,

I try to export bxl file with ultra librarian free reader to mentor pads 9.5 for schematics symbol and layout footprint of tms320f28335.

I have the attached files from ultra librarian.

1512.2014-11-24_08-19-28.rar

I dont know how to use the files for schematic and layout ?

Do everybody know a solution to my problem?

Regards,

Ras

  • 0
    Guru 192875 points

    Hi Ras,

    Ras Sharif said:
    I dont know how to use the files for schematic and layout ?

    The above .bxl file is a footprint file and while designing the schematics you can create the same IC and assign this footprint file to it. So during the layout you don't need to create the same.

    I hope you've understood the steps. Let me know if you require more info on this.

    Watch this:

    Regards,

    Gautam

  • 0 in reply to Gautam Iyer
    Genius 3455 points

    Dear Gautam,

    Thanks a lot for your reply.

    What I understand from yours is that:

    - I should to prepare the schematic symbol myself. Do I say true?

    - the bxl file is a layout footprint. But I can't open the bxl file with pads 9.5. Also I try with ultra librarian to translate it for pads 9.5 but the files attached in my previous post don't recognized.

     

    Regards,

    Ras

  • 0 in reply to Ras Sharif50
    Genius 3455 points

    Dear All,

    The problem was solved.

    The bxl file contains both schematic symbols and layout footprints which the ultra librarian free reader prepare them by converting for your favorite application such as mentor, altium, ....

    You should to go the bellow procedure for mentor pads:

    1- download the bxl file from your semiconductor vendor website.

    2- load the bxl file in ultra librarian application.

    3- select the eda software you want.

    4- click on export bottom.

    5- go to mentor pads logic/layout file menu.

    6- in library you should to import the part/logic/decal form the folder that ultra librarian exported files place there. the address messaged by the ultra librarian.

    Good look

    Ras

  • 0 in reply to Ras Sharif50
    Guru 192875 points

    Ras Sharif said:
    The problem was solved.

    Excellent, thanks for the detailed procedure. It would be helpful to other members.

    Regards,

    Gautam