CCS/LAUNCHXL-F28377S: LAUNCHXL-F28377S: load Program

amin

Expert 1985 points

Part Number: LAUNCHXL-F28377S

Tool/software: Code Composer Studio

Hi,

When I import and run one of the examples from controlSUITE to LAUNCHXL-F28377S, this example works properly.

But after resetting the launchpad, default program runs(Demo program:Example_F28377xLaunchpadDemo) and new program not work.

Thank you for your help.

Best regards,

Amin

over 7 years ago

0 Christopher Chiarella over 7 years ago

TI__Mastermind 30255 points

Amin

Are you loading to RAM or flash? Make sure your switches are set for the right boot mode.

Best Regards
Chris

0 Vamsi Gudivada over 7 years ago in reply to Christopher Chiarella

TI__Guru* 84510 points

Amin,

If you plan to load the example code to Flash, make sure to use the Flash build config (right click on the project, and navigate to Build configurations -> Set Active -> Select CPU1_FLASH_DEBUG) for compiling. By doing this, Flash linker command file gets chosen instead of the RAM linker command file. Also, _FLASH symbol will be added in the compiler pre-defined symbols.

Thanks and regards,
Vamsi

0 amin over 6 years ago in reply to Vamsi Gudivada

Expert 1985 points

Vamsi,

Thank you for your help.

Best regards,
Amin

C2000™︎ microcontrollers

C2000 microcontrollers forum

CCS/LAUNCHXL-F28377S: LAUNCHXL-F28377S: load Program