This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: TPS65400
I have a configuration routine for the tps65400 that programs all of the configuration registers with my application specific settings. Each write is read back along the way is ensure it was written correctly, and all these steps complete with no problems. I then burn the settings by sending the byte STORE_DEFAULT_ALL, also with no issue.
Up to this point the I2C commands of send byte, send word, and read byte have all been used multiple times without any issue, and I can power cycle the IC and verify that all my new settings were properly stored.
My goal is to read back the config sittings by sending the SOFT_RESET byte instead of power cycling, and this is where I have the problem. I send SOFT_RESET byte, and the tps65400 responds with an I2C NACK, and it does not reset the chip.
Am I missing something here? Do I need satisfy some pre-condition before I can send the SOFT_RESET byte? I haven't yet tried a second chip.
When do the SOFT_RESET, we must keep power on the TPS65400.
1. Suggest to do another SOFT_RESET after 1st SOFT_RESET, interval time is 10~50mS.
--> If not fixed, please do power cycling one time, then try SOFT_RESET command.
I remember for the fresh IC, we must do power cycle one time, after that, you can use the SOFT_RESET command to reset IC.
2. Suggest to toggle CE pin to reset IC, it is equivalent to SOFT_RESET.
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to Zhao Ma:
In reply to Bryce Bradford:
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.