Recommend LCD bias and driver

NISHMITHA NAIK

Intellectual 480 points

Other Parts Discussed in Thread: TPS65154

Hello Team,

Currently I am designing LCD with same requirement as you have mentioned.

Could you recommend me with the proper design to meet the same requirement.

Regards,

Nishmitha

over 6 years ago

0 ChristianSchmoeller over 6 years ago

TI__Prodigy 565 points

Hi Nishmitha,
could you please clarify what you mean with "same requirement as you have mentioned"? Are you referring to some other post, document or email?

Thank you,
Christian

0 NISHMITHA NAIK over 6 years ago in reply to ChristianSchmoeller

Intellectual 480 points

Hi Christian,

Yes. I was referring to the post "Recommend LCD bias and driver".

Regards,
Nishmitha

0 Brigitte over 6 years ago in reply to NISHMITHA NAIK

TI__Guru 60245 points

Hello Nishmitha,

Are you referring to this post: https://e2e.ti.com/support/power_management/lcd_oled_bias/f/954/t/620352?tisearch=e2e-sitesearch&keymatch=Recommend LCD bias and driver?

If yes, please have a look at Diaara's answer. As mentioned for a good recommendation we need the available input voltage. If it is 3.3V or 5V, TPS65154 would be a possibility.

Best regards,
Brigitte

Power management

Power management forum

Recommend LCD bias and driver