TI E2E Community
Power Modules - Forum
DCP022415DU unbalanced loads
We are using these 2 watt converters in a product. When using the dual output package, what is the max current per load.
Is it 1/2 rated power / voltage or 1/15 = 66 ma max per output or is it acceptable to pull more from +15 and less from -15 as long as total power is less than 2 watts.
The DCP022415DU can be used in application with unbalanced loads as long as the maximum power 2W is not exceeded. The unbalanced loads will affect the output voltage.
Question concerning the output circuit ?
Is this converter used where the output is floating on a secondary high voltage , either AC or DC or driving a IGBT power Motor Drive/
My contact e-mail is firstname.lastname@example.org
With unbalanced loads is a reasonable design guideline "No load more than 70% of rated power"? Or Am I too optimistic.
I am aware of the 60 volt limitation between input supply and output supply and I am using part to break ground loops. My measured differences between input return and output return is less than 1.5 volts.
The unbalanced Vout bus of 70% on either + or negative is fine.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.