• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 339 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPSM84424: 3D model non correct

Alexander Savchencko
Prodigy 30 points
Part Number: TPSM84424

Dear TI support team,

I'm going to use  TPSM84424 module in my next design.

I've downloaded MOL0024A.stp model from the site.

And for me it is looks like marking dot in 3D model placed to pin 13 corner.

I've checked in PADS 3D viewer v VX2.3 and in eDrawings ver 2017.

Do somebody have the same issue?

Best regards,

Oleksandr

  • 0
    TI__Guru**** 191445 points

    Oleksander,

    I do not directly support TPSM84424, but 3D modeling is a side hobby for me, so I could easily check it with my CAD SW.  You are correct, the pin one marking is in the wrong place in the model.  To be sure I looked at the EVM photo (dot is in the correct location) and assembly marking documentation (dot is in the correct location).  I'll request the symbol be updated.