Customer is using the TPS386596 to monitor a 3.3V rail that comes up 500ms before the actual supply VDD (separate 3.3V). Is this OK?
What if the VSENSE1 and VDD were the same 3.3V supply?
Thanks,
Dan
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Customer is using the TPS386596 to monitor a 3.3V rail that comes up 500ms before the actual supply VDD (separate 3.3V). Is this OK?
What if the VSENSE1 and VDD were the same 3.3V supply?
Thanks,
Dan