This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS3705: TPS3705-33DR min /MR value

Part Number: TPS3705

Hi Sir,

Sorry, This is Our customer HW issue.

But, If the /MR is 90ns, then any problem on chip or Reset Pin?

Hugo

2 Replies

  • Hugo,

    According to the Table 7.6 Timing Requirements, the minimum pulse width must be 100ns for /MR. For a pulse of 90ns, the device might not recognize anything happening.

    -Michael
  • In reply to Michael DeSando1:

    Hi Michael,

    Got it,

    Thank you very much.

    Hugo

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.