• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 443 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

UCD9090: Can "Fusion Digital Power Designer Program" configure its System Monitor's Output Voltage Chart's time axis resolution/format to mSec?

Yizhe Liu48
Prodigy 30 points
Part Number: UCD9090

Hi,

I am wondering Can "Fusion Digital Power Designer Program" configure its System Monitor's Output Voltage Chart's time axis resolution/format to mSec?

In sequencing chart, time displays in mSec resolution. However, in system monitor time displays in date/hour/minute/second format.

I am wondering whether system monitor's resolution could be reconfigured to mSec, that I will be able to monitor voltage rail start up sequencing.

thanks,

yizhe

  • 0
    TI__Guru 58090 points
    The sequencing chart is simulated result therefore it can put any unit there. but for the system monitoring, it is real time polling data from the device.
    Having a msec polling is big burden for the system and it is not configurable..
    Do you want to monitor the ramp-up rate of the power rail?
    thanks
    yihe