• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 31 subscribers
  • Views 551 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LDC1000EVM disconnecting

teresa nash
Prodigy 10 points
Other Parts Discussed in Thread: LDC1612, LDC1614, LDC1312, LDC1314, LDC1101

having the same problem as another person with the EVM disconnecting every 10 seconds...

have the latest GUI from TI's website...

help!

  • 0
    TI__Genius 13650 points
    Hello Teresa,
    I apologize about the inconvenience. I believe that your EVM still has an old firmware revision. To make the EVM compatible with the Sensing Solutions GUI, please follow this procedure:
    1. Please install the old LDC1000 GUI www.ti.com/.../snac058. The GUI should prompt you to upgrade the firmware.
    2. After the firmware upgrade, the new Sensing Solutions GUI should work with the EVM: www.ti.com/.../snoc028

    Please note:
    The LDC1000 is only recommended for metal type identification applications. For all other applications, I recommend using one of our newer devices; They offer many advantages over the LDC1000:
    • The high-resolution multi-channel LDCs (LDC1612, LDC1614) are L-only devices which offer greatly improved measurement accuracy, better part-to-part variation, lower power consumption, easier design integration, and multiple channels.
    • The mid-resolution multi-channel LDCs (LDC1312, LDC1314) are L-only devices which offer better part-to-part variation, lower power consumption, easier design integration, and multiple channels.
    • The high-resolution, high-speed LDC1101 supports both L- and RP-measurements,  greatly improved measurement accuracy, better part-to-part variation, lower power consumption, and easier design integration.