IWR1443BOOST: load parameter configuration from mmWave Sensing Estimator to IWR1443boost?

feng tang

Genius 3595 points

Part Number: IWR1443BOOST
Other Parts Discussed in Thread: IWR1443,

Can we load the configuration parameters from mmWave Sensing Estimator to IWR1443 and IWR1443boost?

Thanks,

over 7 years ago

0 Vivek Dham over 7 years ago

TI__Guru 58035 points

Hello Feng,
You would need to take the values generated fom the sensing estimator and update the profile cfg file in the mmwave demo with those values. You can then load them to the IWR1443 using the demo application.

Regards,
Vivek

0 Vaibhav Mahimkar over 7 years ago in reply to Vivek Dham

TI__Mastermind 23625 points

Hello Feng,
Do you have any more questions on this issue. Else please mark this ticket as verified answer.
Thank you,
Vaibhav

0 Vaibhav Mahimkar over 7 years ago in reply to Vaibhav Mahimkar

TI__Mastermind 23625 points

Hello Feng,

Marking this ticket based on suggested answer. Please file a new one if you need any more help on this topic.

Thank you,
Vaibhav

Sensors

Sensors forum

IWR1443BOOST: load parameter configuration from mmWave Sensing Estimator to IWR1443boost?