TI controllers regarding

applied automation

Intellectual 720 points

Other Parts Discussed in Thread: MSP-EXP432E401Y

Hi,

We are very new to TI controllers. Now we are planning to do our projects using TI controllers.

So please suggest any Standard Controller with development kit for us as a starter.

over 5 years ago

0 YiKai Chen over 5 years ago

Guru 735475 points

If you mean to use Zigbee or Thread protocol, It's recommended to use LAUNCHXL-CC26x2R and you can refer to Zigbee SimpleLink Academy at dev.ti.com/.../overview.html

0 applied automation over 5 years ago in reply to YiKai Chen

Intellectual 720 points

Hi,
I don't mean to use Zigbee. Im beginner to TI Controllers. I need general Purpose TI controller (GPIO,ADC,DAC,PWM,UART) with full support .

0 YiKai Chen over 5 years ago in reply to applied automation

Guru 735475 points

I would suggest you to MSP432 and you can study it from dev.ti.com/.../node first.

0 TER over 5 years ago in reply to YiKai Chen

TI__Guru**** 317180 points

The question does not contain enough information to point you to a specific MCU since most MCUs have the peripherals you are asking about. See www.ti.com/.../overview.html as a starting point.

0 applied automation over 5 years ago in reply to YiKai Chen

Intellectual 720 points

We are very new to TI controllers. We need general purpose ARM MCU with Ethernet support and other common peripherals such as (I2C,SPI,GPIO,UART,ADC,DAC,PWM) with development KIT.

And also we need example codes for using this peripherals.

0 YiKai Chen over 5 years ago in reply to applied automation

Guru 735475 points

I would suggest you to use MSP-EXP432E401Y and you can find peripheral examples at dev.ti.com/.../node

0 TER over 5 years ago in reply to YiKai Chen

TI__Guru**** 317180 points

Please don't double post. This topic is also covered in e2e.ti.com/.../2980288 and you have received the same answer in both threads.

0 applied automation over 5 years ago in reply to YiKai Chen

Intellectual 720 points

Which one is best TIVA C series MCU or MSP432 ?

0 YiKai Chen over 5 years ago in reply to applied automation

Guru 735475 points

Personal opinion, I think MSP432 is better.

0 applied automation over 5 years ago in reply to YiKai Chen

Intellectual 720 points

Hi YiKai,
Thanks a lot! It's really a great help to me.

Zigbee & Thread

Zigbee & Thread forum

TI controllers regarding