We are trying to make BT up on J4 dm814x board using murata com6(wl127xx) chip.
After booting the kernel we did the following insmod operation
When we tried to run hciattach as follows, we got the timeout error
i.e hciattach /dev/ttyO3 texas 115200 &
Please could somebody help me in solving this issue ?
Thanks & Regards,
Please share the error logs. We will check and get back to you.
In reply to Abhijit Kumbhar:
Please find the log file attached.
We got timeout error when we tried hciattach from the command prompt as follows.
root@dm814x-evm:/home/wifimod# hciattach /dev/ttyO1 texas 115200 &
opened serial port
calling cfmakeraw done
Set initial baudrate
inside texas inside texas_init
Initialization timed out.
Thanks and Regards,
In reply to Rohini Srinivas:
Is WiFi working fine in this setup?
Yes. Wifi works in this setup.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.