CC-DEBUG-DEVPACK out of stock

J Lindh

Other Parts Discussed in Thread: CC2650STK, CC2650

Due to high demands the CC-DEBUG-DEVPACK are temporary out of stock and removed from www.ti.com. We are working relentlessly to improve the availability and anticipate having more CC-DEBUG-DEVPACKs available for sale beginning of April.

We are truly sorry for the inconvenience this may cause.

over 9 years ago

pixbroker over 9 years ago

Genius 5820 points

Hello Joakim,

thanks for the update. Although disappointing. I am curious, when and where was the CC-DEVPACK-DEBUGGER ever for sale? We have seen it as PREVIEW on the Ti website but never for sale on the Ti store not distributors, so where was it available to subsequently become out of stock?

Guojin Feng1 over 9 years ago in reply to pixbroker

Prodigy 180 points

Agree with pixbroker. I have kept looking at the webpage of the CC-DEBUG-DEVPACK and never saw it available for ordering. The former page for the debugger looks expired and this new page has been found, but the order link never appears. Even searching on the TI store, I never saw it.

Can you explain where can we purchase one?

Thanks.

Olivier Monnier over 9 years ago in reply to Guojin Feng1

TI__Prodigy 315 points

Hi Guojin Feng1 and Pixbrober,
the CC2650STK debugger DevPack will be put back up in April when we have full mass volume availability for everyone, stay tuned.
thanks
Olivier

Glenn Vassallo over 9 years ago in reply to Olivier Monnier

Guru 21435 points

For those of you interesting in starting developing with the SensorTag, you should be able to do so with the following options.

SmartRF06EB using XDS100v3 (included on board)
XDS100v3 standalone (from 3rd party manufacturers)
XDS200 (from 3rd part manufacturers)

This should do till the DevKit is available, as there are JTAG pins that can be used to connect these programmer to the SensorTag. You will not get access to other pins on the CC2650 that the DevKit makes available, but at least you can begin programming and using the existing sensors in your prototypes.

View this post - e2e.ti.com/.../1466580

Glenn