Part Number: BQ25611D Tool/software: The BQ2561x TS pin is used to monitor the battery temperature via a thermistor with a pull-up and pull-down resistor. As the two resistors represent two unknowns when designing the TS circuit, only two temperature…
Part Number: TDA4AL-Q1 Tool/software: Example application on SDK 10.0 to show large byte transfer between CDD IPC(MCU1_0) and Linux (A72) using cdd_ipc_rc_linux ,rpsmg_char_simple applications on J721S2 ?
Other Parts Discussed in Thread: AM67 , AM67A
Before Linux can communicate with a non-Linux core over the RPMsg inter-processor communication (IPC) protocol, several things needs to be true:
1) RPMsg between Linux and the non-Linux core must be supported…
Other Parts Discussed in Thread: AM67 , AM67A
Parts Discussed in Thread: AM62x, AM62Ax, AM62Dx, AM62Px, AM67, AM67A
The primary role of the Device Management (DM) R5F core is to run the DM task. However, there may be other non-DM code running on the…
Part Number: TLC555 Other Parts Discussed in Thread: , TLC3555-Q1 , TLC3555
Tool/software:
PCN 20231130002.1 is the “Qualification of RFAB using qualified Process Technology, Die Revision, Datasheet update and additional Assembly Site/BOM options…
Part Number: TDA4VM-Q1 Tool/software: On custom boards where UART instances are limited, how can I route debug output from my application running in one domain to a UART instance available in different domain? Specially, I want to enable cross-domain…
Part Number: EDGE-AI-STUDIO
Tool/software:
Model importing in TI has two sets of tools due to historical reasons. These two sets has developed in parallel for a long time. Here is an explanation of the similarity and difference of the two tools. …
FAQ: Isolation >> Electromagnetic Compatibility
Digital Isolators
Isolated Interfaces
Signal Isolators
with Integrated
Power
Opto-Emulators
Electromagnetic
Compatibility
Part Recommendations
and Technical Training…
