Part Number: DS125BR111 Other Parts Discussed in Thread: DS100BR111 , EQ BOOST settings are the same as the CTLE settings.
I am going to give a more concrete definition of the CTLE gain curves.
Above are the CTLE gain curves for the DS100BR111. If…
Part Number: DS320PR410
Do PCIe redrivers support polarity inversion of differential channels? How can this affect the schematic and layout of my PCIe redriver?
Part Number: TDA4VM-Q1
“startJacinto” project is used to manage the Jacinto6,Jacinto7,Sitara AM62x/AM62Ax SDK, include Ubuntu.
Using this tool can effectively improve your work efficiency , you can develop all the work in one terminal, it's my target…
Part Number: AM623
Hi team,
Had a customer ask the following question, could someone please help with below:
We understand that, theoretically, we can support secure boot by setting the eFuses. However, the customer does not have a suitable stage…
Part Number: AM6442
Hi Expert,
can we use this way to program AM64x boot SPI FLASH?
When we want to program,we short the jumper to short the MCU_PORz reset to GND,to let AM64 all pins to initial states,which can release the QSPI pins. Then we…
Part Number: AM2634 Hi experts,
I send a multicast frame from the AM26x device but it is not visible on wireshark
I send a multicast frame to the AM26x device but my application does not receive it.
Is there an issue in the CPSW hardware or…
Part Number: DS110DF111 In this FAQ, I will explain how common 10G ethernet specifications fit into a typical application. The below application diagram comes from the DS110DF111 datasheet.
Many 10G ethernet specifications are defined by the IEEE…