Part Number: TDA4VL-Q1 What is the effort required by the system integrator to enable and test ECC on the different IPs on the SoC using ECC aggregators?

Part Number: INA228 Other Parts Discussed in Thread: SYSCONFIG I’m reading the current register value, but the result is wrong. Why am I not reading the value that I expect to be reading?

Part Number: BQ25785EVM Other Parts Discussed in Thread: BQ25785 , BQSTUDIO Please see attached for the BQ25785 BQZ file to be used with BQSTUDIO software. To use the GUI you will need to download Battery management studio software from TI.com, then…

Part Number: INA238 Other Parts Discussed in Thread: PCA9306 , TCA9517 I’m getting a “no acknowledge” (NACK) when I try to communicate with the power monitor.

Part Number: TDA4VL-Q1 Other Parts Discussed in Thread: TDA4VL What are the recommended POK TRIM value settings for each POK instance?

Part Number: AM625 Other Parts Discussed in Thread: AM62A74 HI TI experts: Customer is measuring the eFuse current and does not seem to be seeing the 400mA current specified in the data sheet. Customeris asking for the current transient waveform.…

Part Number: TDA4VH How to enable falcon boot on J784S4 11.02 Linux SDK ? Boot Flow: R5 SPL -> ATF -> OPTEE -> Kernel Regards Gokul

Part Number: TPS23881B Other Parts Discussed in Thread: TPS23861 , TPS23881 , TPS23882 TPS23881B is an IEEE802.3bt compliant, 8-channel power sourcing equipment (PSE) that injects power onto CAT5 Ethernet cables. When using this device in any wired…

Part Number: TPS3842 What is the function of CTS pin in TPS3842? Can you please explain how to use it?

Part Number: TPS3842 Hello, I have a noisy power supply and need to monitor for OV conditions. Size and noise immunity are very important. Can you please recommend a solution? Thank you.