Frequent Questions

  • [FAQ] AM2612: Unable to program on custom board

    Part Number: AM2612 Other Parts Discussed in Thread: UNIFLASH Hi Team, Customer is programming AM2612 on their own board, but it not works through Uniflash, could you please help to check the log and point out next step? Thanks. Uniflash log.…

  • [FAQ] INA181: How do I properly design an input filter for my INA18x-Q1 device?

    Part Number: INA181 Other Parts Discussed in Thread: INA180 , INA240 How do I properly design an input filter for my INA18x-Q1 device?

  • [FAQ] AM263x/ AM263Px/ AM261x: What should I use in my multi-core application, IPC or Shared Memory?

    Part Number: AM2612 Hi experts, I see that the AM26x devices support Inter-Processor Communication between multiple R5F cores and include a mechanism to maintain shared memory across cores. What is recommended for my multi-core applications? When do…

  • [FAQ] MSPM33C321A: ARM Cortex-M33 VTOR Alignment Requirement

    Part Number: MSPM33C321A Per ARM architecture, VTOR must be aligned to: Alignment = Power of 2 ≥ (Number of vectors × 4) For MSPM33C321A: - ICTR register = 1 → Hardware supports 53 external IRQs (IRQ0- 52 ) - Total vectors = 16 (system exceptions…

  • [FAQ] How to use the ALERT pin of a digital power monitor

    Part Number: INA236 Other Parts Discussed in Thread: INA3221 , INA209 , , INA228 , INA237 I want to use the ALERT pin of a digital power monitor, what should I pay attention to?

  • [FAQ] AM2434: XIP (eXecute In Place) Mode Configuration with Default Serial Flash Parts

    Part Number: AM2434 While the existing OSPI driver implements XIP mode functionality, the default Flash parts (S28HS512T and S25HL512T) available on AM24x, AM64x, AM62x, and AM275x boards, do not support Read-While-Write (RWW) operations or multi-bank…

  • [FAQ] TPS3842: Power rail monitoring and sequencing

    Part Number: TPS3842 I need to monitor and sequence 3 power supply rails. The main bus voltage in my design is 12V, followed by LDOs for 5V, 3.3V, and 1.8V. Can please provide the simplest solution? Also board size is very limited so I need smallest…

  • [FAQ] MSPM0-SDK: MSPM0-SDK: Software and Evaluation Board Design Resources for Application note of Low cost AC motor control solution based on MSPM0 and Triac

    Part Number: MSPM0-SDK This thread is used to update the software or hardware update for application note of Low cost AC motor control solution based on MSPM0 and Triac. 5466.Resource_HW&FW.zip

  • [FAQ] CC2674P10: Security Features on CC2674 / CC13x4 Devices

    Part Number: CC2674P10 Other Parts Discussed in Thread: CC2674R10 , CC1314R10 , CC1354P10 , CC1354R10 , CC2755R10 , CC2755P10 Q1: What security features are available on CC2674 and CC13x4 devices? A: The CC2674 and CC13x4 (CC2674R10, CC2674P10, CC1314R10…

  • [FAQ] TDA4VL-Q1: ECC Self Test Procedure

    Part Number: TDA4VL-Q1 What is the effort required by the system integrator to enable and test ECC on the different IPs on the SoC using ECC aggregators?

View FAQ threads