Part Number: ADC16V130 Other Parts Discussed in Thread: DS25BR440 Hi Team,
In our exiting project we have used ADC and FPGA both are placed in the same board but current architecture we are planning backplane method.
In new system we are going with…
Part Number: ADC16V130 Hello Experts,
We have this query from client:
We want to change the input clock of the ADC dynamically in my design, so that after a number of clocks the device samples with the new frequency. During the frequency change (…
Part Number: ADC16V130 Dear,
for successful layout, I'd like to include LVDS pins propagation delays (in ps) to my layout, to achieve best signal integrity. Could you please publish these numbers for ADS16V130?
Thanks in advance, Jiri
Part Number: ADC16V130 Hi,
Customer want to know if there are other way to do simulation without the IBIS model. As based from link below, there is no ibis and alternative model for this device.
https://e2e.ti.com/support/data-converters-group/data…
Part Number: ADC16V130 Other Parts Discussed in Thread: THS770012 Dear Team,
In our design we are using ADC16V130 part, Our design consists of ADC input followed by balun, ADC differential amplifier and Differential filter to ADC input.
To verify…
Part Number: ADC16V130 Hi,
Is there any IBIS models for ADC16V130CISQ. If yes if you could direct us where to get.
Thanks in advance.
Regards,
Dhiviya k
Hi Elisha,
I think the short answer is, unfortunately, no. What is the most important specification or "care about" of the ADC16V130 that you need to match?
Best Regards,
Dan
Part Number: ADC16V130 Hi, Our customers are evaluating the ADC16V130 and LTC2107. They want to make sure that an input signal of 100 MHz or more can be correctly held by the internal S/H circuit. And they want to know the equivalent circuit from the…
Hi,
here some feedback. You are well on the way of a very thorough analysis. You also need to include the ADC thermal noise in your equation which is about 78.5dBFS.
For target of 70dB SNR @ 70MHz IF and ADC aperture jitter of ~ 80fs I calculate about…
Part Number: ADC16V130 Hi,
Customer want to use ADC16V130, but in the data sheet did not find any graphs of SNR vs Fs and SFDR vs Fs.
Please provide SNR/SFDR plot for Sampling rate =4 0 Msps & Fin = 250 MHz.
