Part Number: ADC3241 Tool/software: We want to use the ADC3241IRGZT in a new system. In addition to a differential CLK input , this also has a differential SYSREF input.
For this SYSREF, the data sheet only states that it is used for overall system…
Part Number: ADC3241 Other Parts Discussed in Thread: LMH5401 , LMH3401 What would be the recommended FDA to drive the input of the ADC3241?
Thanks, -Steve
Other Parts Discussed in Thread: ADC3241 art Number: ADC3241
Hi, TI experts
I use ADC3241 in a design and find a very strange issue. The ADC is sampling at 25Msps. The 7-th bit in the serial LVDS are 0 and 1 alternately, independent with the input…
Part Number: ADC3241 Hi Team,
I'm trying to understand the difference of the hardware reset and software reset of the ADC3241. Reading through the datasheet, it sounds like these two types of resets do the same thing. But the datasheet also mentions…
Part Number: ADC3241 Hello team,
If SYSREF is not used on this part, what is the correct way to terminate the inputs? Is a 0.1uF to ground okay?
Regards,
I.K.
Shin: Please see below. --RJH
Q1> How do I interface between ADC device(JEDS204B Vs LVDS Parallel) and MCU?
RJH>> Not sure I can answer this. It depends on the capabilities of the MCU and the digital interface options. You mentioned before you used…
Hi Brian,
Thank you for reply.
I'd like to request to add ADC3241 and ADC3242 too.
If their INL less than or equal competitor's ADCs, we will can drive out competitor from customer's board.
Best regards,
ACGUY
slau579d.pdf Leejh,
Connect a 80Msps clock (or lower) to SMA J9 with a power of at least 10dBm. See section 1.4 and figure 7 of the attached ADC3423EVM User's Guide.
Regards,
Jim
