Part Number: ADS1192 Other Parts Discussed in Thread: AFE4960 Dear TI experts,
My customer considers ECG measuring IC for their next product. Could you recommend one for my customer ?
- Application : Body composition meter
- desired function : 3-lead …
Part Number: ADS1191 Other Parts Discussed in Thread: ADS1192
Hi, we are facing issues in finding ADC ADS1191IPBSR and so we are evaluating the ADS1192IPBSR .
In our current circuit we have left open the pins 5 and 6 (channel 2 IN2N and IN2P).
We would…
Part Number: ADS1192 Other Parts Discussed in Thread: ADS1298 , ADS1198
Hi,
I want to work with ADS1192 Eval-kit. When I installed the software according to the procedure in User guide, I did not restart my computer immediately. I selected Restart another…
Part Number: ADS1192 Hi
Can i use this ADC for my applications which is having
1) 4-20mA current as input to ADC to convert to Digital.
2) 0-10V analog input to ADC to convert to Digital.
If so can u explain design considerations for my input with this…
Tool/software:
In the ADS129x family, a 4-bit DAC is used to set the lead-off detection threshold for the positive and negative channels inputs. The DAC settings are configured writing to COMP_TH[2:0] in the LOFF control register. The threshold voltages…
Part Number: ADS1192 Hi
The below pins will be unused.
Customer would like to address to open the below unused pins due to constrained board space.
- IN2N, IN2P, IN3N, IN3P, RLDOUT, RLDIN/RSDREF, RLDINV, GPIO1, GPIO2
We would much appreciate you advise…
Part Number: ADS1192 Hi.
I make ECG sensors using ADS 1192 and MCU.
Currently, I am trying to read the register, but REG DATA is not output from DOUT after sending OPCODE as shown in the figure. The value of Status Register + 2-Channel Data is output…
Hi!!
I succeeded in reading registers.
The reason for reading failed was that initialization of the ADS1192 and writing of registers could not be performed due to the time for setting the PWDN / RESET pin low and the data transmission interval to be short…
Part Number: ADS1192 Tool/software: TI C/C++ Compiler Hi!
I try to test the spi interface between ads1192 and MCU!!
Transmission for register writing from MCU to ADS1192 observed and confirmed DIN with an oscilloscope.
Register reading command confirmed…
